How to Easily Clean the Tiles and Tile Joints in Your Bathroom

Easily Clean the Tiles & Tile Joints

Due to humidity, the joints of your floor tiles can blacken and mold. What methods should you use to easily clean and remove dirt from your tiles? By following our advice, you can easily eliminate dirt and mold from floor to ceiling in your bathroom.

The most effective products to clean your dirty joints

The clay stone

By using this product, you will get clean joints and shiny tiles for all your floors. The stone also protects your surfaces, especially against the appearance of limestone. To use it, simply rub your tiles and joints with a sponge soaked in claystone and then rinse.

White vinegar

White vinegar is a flagship product for the household because it cleans many types of surfaces (floor, tiles, etc.). It will effectively descale your bathroom joints. Mix it in a bowl with a few drops of dishwashing liquid. Scrub your joints using a used toothbrush that has been dipped in the bowl, then wait 15 minutes before rinsing. For heavily soiled surfaces, you can wait longer.

The White of Meudon

Lesser known than white vinegar, but just as effective, Blanc de Meudon is a multi-purpose product that can clean many household surfaces, including kitchen and bathroom floors. To use it, you can apply it directly to your joints or mix it with water. Leave it on for an hour or two, scrub with a toothbrush and rinse with water.

Sodium percarbonate

We recommend this product for moldy tile joints. For the dosage, put one measure of percarbonate for 9 measures of water. Apply the solution to the joints using gloves and leave for 1 to 2 hours before scrubbing. Finish by rinsing thoroughly.

Salted lemon

Here is a simple grandmother’s recipe, which will allow you to whiten and shine the joints of your tiles. Cut your lemon in half, dip one half in coarse salt and rub it directly on the joints. Wait at least 1 hour before rinsing with water.

Read more: Steam Cleaning to Maintain Your Carpet

How to clean your tiles with a steam cleaner?

In addition to the tips presented above, you can also use specific cleaning devices such as the SteamShot hand-held steam cleaner or the Powerfresh Lift-Off steamer with a removable tank. These steam cleaners can remove grime and mold from your tiles in minutes to leave your floor sparkling. These devices are designed to wash and sanitize the most difficult surfaces to clean. These steam cleaners send out a jet of high-pressure steam to unearth the most encrusted dirt and eliminate germs. A steam cleaner is therefore particularly recommended for cleaning joints. Simply place a “concentrator” nozzle where the steam comes out and pass it over the surfaces to be washed.

What to do if the joints of your tiles are too damaged?

If you see that after cleaning the joints of the tiles of your floor have hollows or that they crumble, it is urgent to repair them, or even replace them. Indeed, the latter is used to preserve the waterproofness of the tiling. If they are in too poor condition, water can seep in and your tiles can peel off. So don’t wait too long to redo your tile joints in the bathroom or in the kitchen.

About Author

Alfred Harry has completed his education in marketing and started his career as a digital marketer. He is a content writer by profession. And he would love to add multiple things to his knowledge that he can add to his writing style. He writes about cleaning services in Sydney like lounge cleaning services in Sydney.

Total Views: 59 ,
By aamritri

Leave a Reply

Your email address will not be published.

Related Posts